• Tel:0086-371-67816766
    Fax: +86-371-68617124
  • Kevin: +86-15038005999
    Angela: +86-15638227908
  • Add : Gongye Road and Tonghang Er Road crossing, Shangjie District, zhengzhou, Henan, China

The Number of Suitable Rotary Kiln Fill Rate

Published 2020/6/24 15:18:34

The use of the rotary kiln is applied in many fields, and because of its good performance, it is widely used in the chemical industry and is well received by many manufacturers and customers. The following article explains in detail how appropriate the filling rate of this equipment is. , Let’s take a look together.
   Filling rate is the percentage of the material in the rotary kiln to the total volume of the kiln body cylinder. The general rule is that the larger the inner diameter of the kiln body, the smaller the filling rate. For example, for a rotary kiln with an inner diameter of less than 1m, the appropriate filling rate is 15%; while for a rotary kiln with an inner diameter of 2.5m, the allowed filling rate is only 6%. If the filling rate is too large, the material is not sufficiently heated and uneven, which will affect the calcination quality of the material. If the filling rate is too small, although the calcination quality of the material is good, the output of the rotary kiln is reduced. Therefore, it is necessary to choose a reasonable filling rate that can maximize the output and ensure the calcination quality.
Through the content explained in the article, you can generally understand how much the filling rate of this rotary kiln equipment is appropriate. I hope that the content explained in the article will help everyone. Pay more attention to this issue in future operations and use it. Operation is helpful.


UP:How to Discharge the Gas in the Rotary Kiln
NEXT:Inspection and Commissioning Work After Installation of Rotary Kiln

Address:Gongye Road and Tonghang Er Road crossing, Shangjie District, Zhengzhou, Henan

Copy Right: Henan Hongke Heavy Machinery Co., Ltd. All rights reserved.