• Tel:0086-371-67816766
    Fax: +86-371-68617124
  • Kevin: +86-15038005999
    Angela: +86-15638227908
  • Add : Gongye Road and Tonghang Er Road crossing, Shangjie District, zhengzhou, Henan, China

Analyze the Effect of Rotary Kiln on Metallurgical Industry

Published 2022/1/4 10:28:45

Metallurgical Rotary Kiln Rotary kiln occupies a key position in the production of some rare metals, and is used for emergency treatment of iron ore, ilmenite, and intermediate materials to terminate calcination and calcination.

Jianxin recommends analyzing the effect of rotary kiln on metallurgical industry:

Blast furnace equipment The step of aluminum smelting is the production of aluminum oxide. In the step of producing aluminum oxide by calcination method, the dry material made of bauxite, lime powder, alkali and other raw materials is firstly calcined to complete the material. The whole process of calcination is terminated in the rotary kiln, and the firing temperature is around 1300℃. A process flow for the production of aluminum oxide is to sinter aluminum chloride into aluminum oxide. At this stage, some processing plants still use rotary kilns with a firing temperature of 1200-1250 °C. (The actual temperature refers to the raw material temperature, and the temperature of the kiln gas used for heating is also higher than it by 200~300℃).

In the production of mining equipment in carbon factories, raw materials (such as petroleum coke, foundry coke, delayed time coke, bitumen coke, long flame coal) should be calcined at 1100~1300 ° C and no CO2 standard to clean up. Remove all moisture content and volatile matter, make its structure more compact, increase its true ratio, and improve heat resistance, oxidation resistance, impact toughness, electrical conductivity and heat transfer. This whole process can be carried out in a rotary kiln.

Mining Equipment

The consumption of bismuth oxide salt first uses hydrochloric acid and fluorite (CaF2) as raw materials to obtain hydrogen fluoride, which is also terminated in a rotary kiln. The boring (rotary) kiln is also used to stop the boring of various bismuth oxide salt products and plaster of paris.


The calcined aluminum oxide plant is often attached to a large range of tailings chemical plants, and the rotary kiln is the key equipment for calcining cement clinker.


In the one-stage concrete segregation method of producing copper with refractory copper chloride iron ore, the iron ore is boring and crushed with ~2% sodium oxide and 3.5~4% soot and fly ash registered in the rotary kiln.


The ammonia leaching method for emergency disposal of copper-containing tailings ponds first uses rotary kilns to terminate the reduction and burning of boring tailings ponds.


During the hydrometallurgical process of zinc, the leaching filter residue produced by the yield rate contains about 20% of zinc and some valuable metal materials. Generally, rotary kiln evaporation emergency disposal is used. For low-grade active zinc oxide iron ore that cannot be flotated immediately, the rotary kiln can also be used for emergency treatment of evaporation and burning.


The above is the content collected by Tonghua Jianxin Technology Co., Ltd. for everyone. If you need to formulate it, please contact us.

UP:Methods for Reducing Exhaust Gas Emissions from Cement Rotary Kilns
NEXT:What Should I Do if the Particle Size of the Metallurgical Rotary Kiln is Too Coarse?

Address:Gongye Road and Tonghang Er Road crossing, Shangjie District, Zhengzhou, Henan

Copy Right: Henan Hongke Heavy Machinery Co., Ltd. All rights reserved.