• Tel:0086-371-67816766
    Fax: +86-371-68617124
  • Kevin: +86-15038005999
    Angela: +86-15638227908
  • Add : Gongye Road and Tonghang Er Road crossing, Shangjie District, zhengzhou, Henan, China

Precautions Before Starting Lime Kiln

Published 2022/4/27 16:39:39

As the main equipment for calcining lime, lime kiln is widely used in iron and steel industry, alumina industry, calcium carbide industry, refractory and other industries because of its characteristics of energy conservation, environmental protection and high degree of automation. Since the lime kiln itself is also a kind of equipment with relatively large resource consumption, in order to ensure the normal and efficient operation of the equipment, it is necessary to operate in strict accordance with the instructions whether it is started up or trial run. What should be paid attention to when starting up the lime kiln?
Hongke heavy industry reminds you that before starting the operation of lime kiln, you must be familiar with the following points:
1. Before operation, add lubricating oil to the bearing, reducer and roller, and check whether the fasteners are loose and whether there are obstacles at the operating part.
2. Test the empty vehicle and observe the current. If it is normal, it can be loaded and put into operation;
3. During the loading operation of lime kiln, check the flexible rotation of traction chain and roller to see whether there is deviation;
4. Check whether the lubricating oil is sufficient and handle it in time.
5. Always pay attention to the current fluctuation of lime rotary kiln motor. If the fluctuation range is large, go to the site to find out the cause.
6. There are many reasons for the automatic shutdown of lime kiln, which may be electrical failure and stuck materials. Do not start the kiln rashly or repeatedly until the reason is found out, so as to prevent accidents.
7. Regularly check the tooth shape of the chain wheel of the lime kiln, the wear degree of the roller edge and the upper and lower tracks. If the wear is serious, replace it with new accessories.

UP:Rotary Kiln Maintenance Skills: Teach You How to Prolong the Service Life of Rotary Kiln!
NEXT:What Characteristics Should a Good Rotary Kiln Have?

Address:Gongye Road and Tonghang Er Road crossing, Shangjie District, Zhengzhou, Henan

Copy Right: Henan Hongke Heavy Machinery Co., Ltd. All rights reserved.